2021/12/11
Automatic feeding & mixing system
Mixing:
Adopt automatic feeding system and double planet type high speed vacuum mixer, feeding greatly improve the work efficiency efficiency and accuracy, in the stirring toothed dispersion and planetary frame revolution together, at the same time high speed rotation, so that the slurry to achieve the ideal mixing effect!
● Speed: 2000rpm/min (revolution)
● 30rpm/min (rotation);
Coating:
The use of automatic feeding system and advanced transfer coater, slurry in the process of vacuum slow stirring to complete the feeding coating, improve the stability of slurry viscosity, so as to make the coating surface density stability!
● Coating weight tolerance: ±1.2% (single side) ±1.5% (double side);
● Clearance tolerance: ±1mm
Automatic continuous roller press
Calendering:
Adopt domestic advanced 800*800 large diameter roller press, so that the thickness of the pole piece consistency and roller after the low rebound rate of the pole piece!
● Adopt secondary roller technology: thickness tolerance ±3μm
● High precision clearance control technology
● Closed loop control of pole sheet thickness
Fully automatic slitting machine
Slitting:
Adopt Japanese Nishimura type automatic continuous cutting, automatic deviation correction; High precision ball screw, DC servo actuator to achieve high precision deviation correction!
● Particle cleaning system
● Slitting knife vacuum cleaning system
● Width tolerance ±0.1mm
● Burr control within 5μm
Fully automatic production machine
Pole plate:
The use of automatic production machine, to achieve automatic welding pole ear, automatic pole piece adhesive protection, to ensure the quality and consistency of products!
● Particle cleaning system
CCD online monitoring winding, real-time monitoring of pole piece adhesive position, pole piece size, and the appearance of the pole piece;
● Ultrasonic welding Teb, strong guarantee positive and negative Teb welding effect
CCD detection
![]()
CCD detection
The use of automatic CCD detection equipment, to achieve the size of the pole piece, appearance detection and automatic correction, so that the size of the detection pole piece, appearance to meet the quality requirements!
● High speed detection and high precision photography technology (60gm/Min)
● Infrared induction recognition of poor pole piece
Automatic winding machine
Winding:
● The use of automatic winding equipment, tension detection and automatic correction, so that all aspects of the size of the battery to meet the quality requirements!
High speed winding and low tension control (50g Min)
● Infrared induction automatic control pole lug center distance, tolerance ±0.5mm
Top side Packing:
The use of six station automatic top side sealing machine, the use of CAM segmentation quasi positioning, complete top sealing, side sealing, pressure Angle, two short circuit, cutting station, and the manipulator automatically eliminate defective products!
● Side sealing package length and width tolerance ±0.5mm
● Seal thickness tolerance ±10μm
● Pole ear glue exposed 0.5-1.5mm
Baking:
Adopt three-stage vacuum pump mode high vacuum baking box, the cavity body to reach the vacuum state, at the same time adopt PID automatic constant temperature control mode, make the baking temperature uniformity to reach ±2℃!
● Workshop dew point ≤-45℃ (0.4%)
● High vacuum, up to 100 pa level pole water control content is less than 200PPm
注 液(Injection ):
Automatic liquid injection:
Using the domestic advanced automatic liquid injection machine, the equipment uses high-precision ceramic liquid injection pump and high-precision electronic scale, before and after the liquid injection, respectively weigh its weight and archiving on the computer, control each piece of cell liquid injection, its consistency and stability!
● Glove box dew point ≤-50℃
● Liquid injection closed-loop system, automatic weighing before and after liquid injection, liquid injection precision control is ±0.1g
● Vacuum injection system
Formation of pressure:
High temperature and high pressure formation is adopted to make the positive and negative poles fit the diaphragm more closely, so as to ensure the formation of dense and complete SEI film on the negative pole surface. Screen out defective products by voltage and core hardness!
● Hot pressing forming, cold pressing forming
● Temperature control ±3℃
● Core thickness control ≤ 0.2%
Degassing & Folding:
The gas produced in the cell is discharged through high vacuum, and the sealing edge is encapsulated, the two sides are cut, folded and ironing through automatic completion, and the side glue is fixed!
● Independent chamber degas, vacuum consistency is good
● Packaging thickness tolerance ±10um
● Core width tolerance ±0.5mm
Feedback type volumetric testing cabinet
Capacity testing:
The capacity of each battery in each batch is tested by high-performance storage cabinet, and the products with bad voltage and unqualified capacity are screened out by computer software, so that the capacity of the delivered battery can reach customer satisfaction.
● Voltage accuracy tolerance (mV) : ± (0.1%FS + 0.1%RD)
● Current accuracy tolerance (mA) : ± (0.1%FS + 0.1%RD)
OCV detection and dimension detection
OCV Testing & Dimension Measuring:
Using high-performance OCV testing equipment and automatic packaging line automatically collect and store test data, and through the traceability system and database data for automatic calculation and analysis, automatically reject unqualified products, battery shipment can meet customer needs!
● Voltage accuracy tolerance (mV) : ± (0.1%)
● Current accuracy tolerance (M ω) : ± (0.5%)
Anhui Aobang Technology Co., Ltd copyright {ICP record No} {Disclaimers}